Related Products

92-100-245 Armature Kit Fits 112lbs Motors (36 Volt)

  This Kit can be used to rebuild and re-seal Minn Kota 4.5” 112lbs lower units models. - Minn Kota Fortrex models with 112 lbs. thrust- Minn Kota ...

92-100-214 Armature Kit Fits 80lbs Motors (24 volt)

This Kit can be used to rebuild and re-seal Minn Kota 4" 80lbs lower units models. Minn Kota Fortrex models with 80 lbs. thrust Minn Kota Terrova ...

2994102 Minn Kota Micro Remote

Compatibility - Bluetooth-enabled Minn Kota navigation systems (2017 and newer)- Minn Kota i-Pilot Bluetooth systems (2017 and newer)- Minn Kota i-...

2996406 Minn Kota Heading Sensor

This Bluetooth-enabled heading sensor contains a compass that detects your boat's heading and communicates it to your trolling motor that operat...

2774072 Minn Kota Control Board - Ulterra / Riptide - 36 Volt - 60" Shaft

The Minn Kota Control Board Assembly, part number 2774072, designed for 36 Volt systems with a 60" shaft, is a critical component for ensuring the ...

2205603 Minn Kota Riptide Ulterra Decal Battery Meter Power Status

Product DescriptionMinn Kota Control Panel Decalw/ On-Off Button For Use With: - Minn Kota Riptide Ulterra Models Part Number: 2205603 Previous Par...

1865023, 2341160, 1378160 Minn Kota MKP-38 Weedless Wedge 2 Prop 36volt 112lbs 4.5"

Minn Kota Trolling Motor Prop MKP-38 Weedless Wedge 2 112 lb. Thrust Part #1865023Prop #2341160Service #1378160 Hub Diameter: 4.5 inches For Use Wi...

2777903 Minn Kota Cam w/Magnet Ulterra

The Minn Kota Cam Arm Magnet and Spacer Assembly with PART NUMBER 2777903 is designed for use with Ulterra and Riptide Ulterra models. This assembl...

2774070 Minn Kota Control Board - Ulterra / Riptide - 24 Volt - 60" Shaft

Minn Kota Control Board Assembly Voltage: 24 Volt Shaft Length: 60" Part Number: 2774070 Previous Part Number: 2774080 Compatible With: Min...

2777817 Minn Kota Tilt Motor Upgrade Kit - Ulterra / Riptide

Product Details: Compatible With: Minn Kota Ulterra Models Minn Kota Riptide Ulterra Models Part Number: 2777817 Previous Part Number: ...

92-100-245 Armature Kit Fits 112lbs Motors (36 Volt)

This Kit can be used to rebuild and re-seal Minn Kota 4.5” 112lbs lower units models. - Minn Kota Fortrex models with 112 lbs. thrust- Minn Kota Te...

1378132, 2331160, 1865018 Minn Kota Weedless MKP 33 Wedge 2 Prop

Minn Kota Trolling Motor Prop MKP-33 Weedless Wedge 2 Part #1865018Prop #2331160Service #1378132 Hub Diameter: 4 inches For Use With: - Engine Moun...

2773625 Minn Kota Ulterra Tilt Bracket Assembly

The Minn Kota Ulterra Tilt Bracket Assembly with part number 2773625 is designed for both Ulterra and Riptide Ulterra models. This assembly is comp...

2887821 Minn Kota Riptide Ulterra Trim Module 72" Shaft Models Saltwater

  *_Minn Kota Riptide Ulterra Trim Module Motor with Belt Assembly_* *Specifications*- Shaft Length: 72"- Compatible Voltage: N/A *Compatibility*- ...

140-010 Minn Kota Armature Bearing .865" Diameter

  Minn Kota Armature Bearing   DIMENSIONS Outer Diameter: .865"  Inner Diameter: .3125" Depth: .275" Bearing Fits 80lbs Armatures   THIS BEARING...

2774071 Minn Kota Control Board - Ulterra / Riptide - 24 Volt - 45" Shaft

Product Description Part Number: 2774071 Minn Kota Control Board Assembly24 Volt / 45" Shaft Compatible With: Minn Kota Ulterra Models (24 Volt / ...

2889460 Minn Kota Seal And O-Ring Kit 4" Diameter

Part Number: 2889460 Minn Kota Lower Unit Seal Kit Measurement: Fits 4" Lower Unit Diameter Applicable Models: -All Minn Kota 74# Hand and Foot Co...

140-014 Minn Kota Armature Bearing 112 lb. 36 Volt

Minn Kota Ball Bearing Specifications: - Inner Diameter: 0.389 inches- Outer Diameter: 1.022 inches Compatibility: - Minn Kota 36V, 112lb thrust mo...

2994075 Minn Kota I Pilot Remote

Minn Kota I-Pilot Bluetooth Remote Control Specifications- Compatibility: Bluetooth-enabled i-Pilot systems- Voltage: N/A- Dimensions: Compact desi...

2203912 Minn Kota Ulterra 112 LB Right Motor Ramp

Minn Kota Bow Mount Motor Ramp Kit   Kit Includes: - 1 Motor Ramp - Left (2773947) - 1 Motor Ramp - Right (2203912)   Compatibility: - Minn Kota Ul...

830-094 Minn Kota Thru Bolt 2 Pack for 4" and 4.5" Lower Unit

830-095 Minn Kota Thru Bolt 2 Pack for 4" Lower Unit Compatible with all 74 LBS & 80 LBS 4" lower units except for the Terrova 80 LB with US2. ...

2773947 Minn Kota 112 LBS Ulterra Left Motor Ramp Assembly

Part Number: 2773947 The Minn Kota 112 LBS Ulterra Left Motor Ramp Assembly is a vital component designed for the Minn Kota Ulterra 112 lbs. freshw...

2776523 Minn Kota Riptide Ulterra Steering Motor 24 Volt / 80lbs Saltwater

Minn Kota Riptide Ulterra Steering Motor Transmission Specifications- Voltage: 24V Compatibility- Minn Kota Riptide Ulterra 24V Saltwater Models In...

2881450 MINN KOTA SEAL & O RING KIT FITS 4.5" LOWER UNITS (36volt)

2881450 MINN KOTA SEAL & O RING KIT FITS 4.5" LOWER UNITS (36volt)

92-100-245 Minn Kota 36 Volt Armature (112# Models)

Minn Kota Lower Unit Armature Assembly - 112# Thrust Specifications: Thrust: 112 pounds Diameter: 4.5 inches Voltage: 36 Volt Compatibility: ...

2773946 Minn Kota Ulterra FW 80 LBS Left Motor Ramp Assembly

Part Number: 2773946 The Minn Kota Ulterra FW 80 LB Left Motor Ramp Assembly is a crucial component designed for the Minn Kota Ulterra 80 lb. fresh...

2200810 New BELT for Minn Kota Ulterra Trim Belt (For Trim Housing)

2200810 New BELT for Minn Kota Ulterra Trim Belt (For Trim Housing) Upgrade your Minn Kota Ulterra trolling motor with the 2200810 Trim Belt. Desig...

830-095 Minn Kota Thru Bolt 2 Pack for 4" Lower Unit

830-095 Minn Kota Thru Bolt 2 Pack for 4" Lower Unit

4 Inch Minn Kota Brush & Seal Kit (24volt) (80lbs)

This Kit can be used to rebuild and re-seal Minn Kota 4" 80lbs lower units models. - Minn Kota Fortrex models with 80 lbs. thrust- Minn Kota Terrov...

2774083 Minn Kota Control Board Ulterra 112 lb 36 Volt 45" Shaft

Minn Kota Control Board Assembly Voltage: 36 Volt Thrust: 112 lb. Shaft Length: 45" Part Number: 2774083 Compatible With: Minn Kota Ulterra...

2776524 Minn Kota Riptide Ulterra Steering Motor 36 Volt / 112lb Saltwater

4.5 inch Brush & Seal Kit (36v) (112lbs)

This Kit can be used to rebuild and re-seal Minn Kota 4.5” 112lbs lower units models. - Minn Kota Fortrex models with 112 lbs. thrust- Minn Kota Te...

188-095 Minn Kota Trolling Motor Part - 4.5" BRUSH KIT (2 EA)

Minn Kota Lower Unit Brush Assembly (2-Pack) Specifications: - 36V, 112lb thrust- 4.5" diameter lower unit Compatibility: - Minn Kota Fortrex 112lb...

9-738-015 24 volt 80lbs Brush Plate

The Minn Kota 9-738-015 Brush Plate Assembly is a high-quality replacement part designed for Minn Kota trolling motors. This brush plate is compati...

411690-1 Minn Kota TROLLING MOTOR REMOTE Advanced GPS Navigation

The Minn Kota® Advanced GPS Navigation Wireless Remote puts total trolling motor control and more in your hands. This handheld system can be paire...

2991275 Minn Kota 72" Terrova & Ulterra Coil Cord Assembly

Minn Kota Coil Cord Assembly, no sonar, 72" shaft. Fits:• Terrova• Ulterra• Riptide ST• Riptide UlterraPart #: 2991275

2774116 Minn Kota Riptide Ulterra I-Pilot Controller Bluetooth Cover 1.6

Minn Kota I-Pilot Controller Top Cover Assembly Compatibility: Minn Kota Riptide Ulterra I-Pilot Bluetooth Models (2017 and newer) Part Number: 277...

2991271 MINN KOTA 54"-60" TERROVA & ULTERRA COIL CORD ASSEMBLY

Minn Kota Coil Cord Assembly (No Sonar) - Fits 45-60" Shafts Specifically designed for:• Minn Kota Terrova• Minn Kota Ulterra• Minn Kota Riptide ST...

2390710 Battery Minn Kota i-pilot link remote battery 3.0 (2017-Newer)

Minn Kota I-Pilot Link Remote Battery • Type: Lithium LiPo pack• Compatibility: Minn Kota I-Pilot Link remotes (2017 and newer) with Bluetooth• Not...

2770100 Minn Kota Release Knob with Screw Kit Ulterra Service

Minn Kota Tilt Bracket Release Knob • Includes: Release knob and screw• Compatibility: ○ Minn Kota Ulterra models ○ Minn Kota Riptide Ulterra model...

2774090 Minn Kota Control Board Ulterra / Riptide (24 Volt) (54" Shaft)

Minn Kota Control Board Assembly Details • Voltage: 24V• Shaft Length: 54"• Compatibility: ○ Minn Kota Ulterra models ○ Minn Kota Riptide Ulterra m...

188-094 Minn Kota Trolling Motor Part - 4.0” BRUSH KIT (2 EA)

  Minn Kota Lower Unit Brush Assembly (2-Pack) Compatibility: - Minn Kota Maxxum (74-101# motors)- Minn Kota PowerDrive (74-101# motors)- Minn Kota...

2373241 Minn Kota I-Pilot Link Remote Charging Cable (USB 5’)

USB Charger Plug for Minn Kota I-Pilot Link Remotes • 5-Foot Length• Compatible with I-Pilot Link Remote Controls

2774118 Minn Kota Riptide Ulterra I-Pilot Link Controller Bluetooth Cover 3.0

Minn Kota I-Pilot Link Controller Top Cover Assembly • Compatible with Minn Kota Riptide Ulterra Bluetooth I-Pilot Link Models• Part Number: 2774118

725-095 Minn Kota Seal Bore Paper Tube 80-112lb

Minn Kota Paper Tube Lower Unit Seal Bore Fits 80–112 lb. Thrust Models Precision-engineered to maintain a secure seal within the lower unit, this ...

1866081 Minn Kota Ulterra/RT Ulterra Corded Foot Pedal

Minn Kota Ulterra Corded Foot Pedal - Dual-Mode Operation: Controls AutoStow/Deploy, Power Trim, steering, speed, prop on/off, Spot-Lock, and AutoP...