2771733 Minn Kota Ultrex 36 volt 45 inch shaft base
Part Number: 2771733
Base is for a 36 volt Minn Kota Ultrex with a 45 inch shaft. (Brushed Motor)
Minn Kota
1 In Stock
Part Number: 2771733
Base is for a 36 volt Minn Kota Ultrex with a 45 inch shaft. (Brushed Motor)
Related Products
2884023 Ultrex Steering Sensor Board Kit
The 2884023 Minn Kota Steering Sensor Board has been newly revised with a sealed ribbon for added protection. This board is designed to replace the...
2283934 & 2283939 Minn Kota 45" Ultrex Side Plate Set
The 2283934 & 2283939 Minn Kota 45" Ultrex Side Plate Set is designed for Minn Kota Ultrex models with a 45" shaft from 2018 to the present. Th...
92-100-214 KIT MINN KOTA ARMATURE ASSEMBLY 24 VOLT 4" 80lb
This Kit can be used to rebuild and re-seal Minn Kota 4" 80lbs lower units models. - Minn Kota Fortrex models with 80 lbs. thrust- Minn Kota Terrov...
92-100-245 Minn Kota 36 Volt Armature (Ultrex) (Various Other 112# Models)
Minn Kota Lower Unit Armature Assembly - 112# Thrust Specifications: Thrust: 112 pounds Diameter: 4.5 inches Voltage: 36 Volt Compatibility: ...
2777018 Minn Kota 24 Volt Lower Unit wIth Shaft (45") (Ultrex/Terrova)
Minn Kota Lower Unit with Shaft 45" Inch Shaft US2 Sonar Applicable Models: 24 Volt Minn Kota Ultrex with 45-inch Shaft/ US2 Sonar 24 Volt Minn ...
2774061 Minn Kota 36V Ultrex Control Board
2774061 Minn Kota 36v Ultrex Factory Control Board Replacement.
2774060 Minn Kota 24 Ultrex Control Board
2774060 Minn Kota Ultrex 24 Volt Control Board For use with 80lbs Thrust Models. (No Warranty on Electrical Parts)
2774069 Minn Kota 24 Volt & 36 Volt Terrova & Riptide RT w/i-Pilot Control Board
The Minn Kota Control Board Assembly, part number 2774069, is designed for 24 and 36 Volt systems with 80 and 112 lb. thrust. It is compatible with...
2774018 Minn Kota Ultrex (SEALED) Power Switch UPGRADE
The Sealed Ultrex Power Switch Upgrade Kit is a direct replacement for the Minn Kota Ultrex Power Switch (Part #2044022). This upgrade kit effectiv...
2771734 Minn Kota Ultrex 36 volt 45 inch shaft base
Part Number: 2771733 Base is for a 24 volt Minn Kota Ultrex with a 45 inch shaft. (Brushed Motor)
2770820 Minn Kota Lift Belt Kit for Ulterra Trolling Motor
The Minn Kota Lift Belt Kit with Part Number: 2770820 is designed for use with Ulterra trolling motors. This lift belt runs through the trim module...
2776522 Minn Kota 36 Volt Ulterra Steering Housing Assembly
The Minn Kota Ulterra 36 Volt Steering Housing Assembly with part number 2776522 is designed for freshwater use. This assembly is compatible with t...
2773625 Minn Kota Ulterra Tilt Bracket Assembly
The Minn Kota Ulterra Tilt Bracket Assembly with part number 2773625 is designed for both Ulterra and Riptide Ulterra models. This assembly is comp...
2200810 New BELT for Minn Kota Ulterra Trim Belt (For Trim Housing)
2200810 New BELT for Minn Kota Ulterra Trim Belt (For Trim Housing) Upgrade your Minn Kota Ulterra trolling motor with the 2200810 Trim Belt. Desig...
2773947 Minn Kota 112 LBS Ulterra Left Motor Ramp Assembly
Part Number: 2773947 The Minn Kota 112 LBS Ulterra Left Motor Ramp Assembly is a vital component designed for the Minn Kota Ulterra 112 lbs. freshw...
2203911 Minn Kota Ulterra 80 LBS FW Right Motor Ramp
Part Number: 2203911 The Minn Kota Ulterra 80 LBS FW Right Motor Ramp is a vital component designed for the Minn Kota Ulterra 80 lb. freshwater tro...
2773946 Minn Kota Ulterra FW 80 LBS Left Motor Ramp Assembly
Part Number: 2773946 The Minn Kota Ulterra FW 80 LB Left Motor Ramp Assembly is a crucial component designed for the Minn Kota Ulterra 80 lb. fresh...
2887807 Minn Kota Ulterra Trim Motor FW 45"
The Minn Kota Ulterra Trim Motor Assembly (FW 45") with part number 2887807 is designed for freshwater use and fits Minn Kota Ulterra models with a...
2777903 Minn Kota Cam w/Magnet Ulterra
The Minn Kota Cam Arm Magnet and Spacer Assembly with PART NUMBER 2777903 is designed for use with Ulterra and Riptide Ulterra models. This assembl...
2991531 Minn Kota Ultrex Shaft Clamp Collar - Depth Adjustment Upgrade
The Minn Kota Ultrex Shaft Clamp Collar - Depth Adjustment Upgrade with PART NUMBER 2991531 is designed to replace the original depth collar (part ...
2994912 Minn Kota Lift Assist Gas Spring Pin Hardware Kit - Ultrex / Fortrex
Part Number: 2994912 The Minn Kota Lift Assist Gas Spring Pin Hardware Kit is an essential accessory designed for use with Ultrex, Fortrex, and Rip...
Minn Kota Ultrex Cable Jacket and Coil Cord Cover Kit
Kit Includes following part numbers: 2265430 Minn Kota 5' Cable Jacket 2296400 Minn Kota Wrap Drum Cover 2296410 Minn Kota Coil Cord Cover 2296405...
2281932, 2287300, 2283411 Minn Kota Rear Pivot + Bushing Kit - Ultrex & Fortrex
The Minn Kota Rear Pivot + Bushing Kit is designed for Ultrex and Fortrex trolling motors, ensuring smooth and reliable operation. This comprehensi...
2297505/2297515 MINN KOTA ULTREX STEERING CABLE (UPGRADE), RIGHT AND LEFT
The Minn Kota Ultrex Steering Cable Upgrade Kit (part numbers 2297505 and 2297515) is an essential component for maintaining the precision and resp...
2773806 Minn Kota Trolling Motor Part - 33" Fortrex / Ultrex Hold Down Strap
Minn Kota 33" Fortrex / Ultrex Hold Down Strap (2773806) Ensure your trolling motor stays secure during transport and storage with the Minn Kota 33...
2774083 Minn Kota Control Board Ulterra 112 lb 36 Volt 45" Shaft
The Minn Kota Control Board, Part Number 2774083, is designed for Ulterra trolling motors with 112 lb thrust, 36 Volt systems, and a 45" shaft. Thi...
2776521 Minn Kota Ulterra 24V Freshwater Steering Housing Assembly
The Minn Kota Ulterra 24V Freshwater Steering Housing Assembly, Part Number 2776521, is a genuine Minn Kota part designed to ensure precise and rel...
2887802 Minn Kota Ulterra Trim Module for 60" Shaft 80 and 112 Pound Thrust
The Minn Kota Ulterra Trim Module, Part Number 2887802, is a vital component designed for 60" shaft trolling motors with 80 and 112 pound thrust. T...
2774082 Minn Kota Control Board - Ulterra / Riptide - 36 Volt - 60" Shaft
The Minn Kota Control Board Assembly, part number 2774082, designed for 36 Volt systems with a 60" shaft, is a critical component for ensuring the ...
2774081 Minn Kota Control Board - Ulterra / Riptide - 24 Volt - 45" Shaft
Product Description Part Number: 2774081 Minn Kota Control Board Assembly24 Volt / 45" Shaft Compatible With: Minn Kota Ulterra Models (24 Volt / ...
2297505 Minn Kota Ultrex Right Steering Cable
The Minn Kota Ultrex Right Steering Cable Assembly, part number 2297505, is an essential component for maintaining the precise and responsive steer...
2297515 Minn Kota Ultrex Left Steering Cable
The Minn Kota Ultrex Left Steering Cable Assembly, part number 2297515, is a crucial component designed to ensure precise and responsive steering f...
2884706 | KIT,SCREW DOWN INSERT PLUG,BLK
The Minn Kota Screw Down Plug Insert Kit, part number 2884706, is a reliable and essential accessory for your Minn Kota trolling motor. This kit in...
92-100-214 Minn Kota 24 Volt Armature 80lbs (Ultrex,Terrova,Ulterra,Fortrex)
Minn Kota Lower Unit Armature Assembly Specifications: Diameter: 4 inches Voltage: 24 Volt Applicable Models: Hand Control Models: Minn Kota...
2281932 MInn Kota Rear Pivot (Ultrex/Fortrex)
The Minn Kota Bow Mount Rear Pivot Assembly, part number 2281932, is an essential component engineered to deliver stability and smooth operation fo...
2283615 MInn Kota Latch Bar (Ultrex/Fortrex)
The Minn Kota Bow Mount Latch Bar, part number 2283615, is an essential component designed to lock the bow mount bracket securely in the deployed p...
2292300 Minn Kota Ultrex Cable Drum
Minn Kota Steering Cable Pulley Drum Applicable Models: Minn Kota Ultrex Models Part Number: 2292300 Description: The Minn Kota Steering Cable Pu...
